{ Free Pass4sure Microsoft Certification Braindumps }

Preparation Guide for Exam 70-547
PRO: Designing and Developing Web-Based Applications by Using the Microsoft .NET Framework

Audience profile
Candidates for this exam work on a team in a medium-sized or large development environment that uses Microsoft Visual Studio .NET 2003 Enterprise Developer or Visual Studio 2005. Candidates should have a working knowledge of Visual Studio 2005 and a sound knowledge of the new features of ASP.NET 2.0. Candidates should have at least two years of experience developing applications by using the Microsoft .NET Framework.

Candidates should have at least three to four years of on-the-job experience that has been dedicated to Web application development. In most cases, candidates will be full-time developers, who develop server-side ASP.NET code that creates the browser-based, client-side interface to an application.

Candidates should have worked in the following phases of the application life cycle:

• Technical envisioning and planning

• Design and development

• Stabilizing and releasing

Candidates should be able to design and develop the Web interface of common business applications, such as:

• Web-based client applications, both intranet and Internet, that may connect to data stores or middle-tier business logic

• Data-oriented applications that provide data entry, data analysis, and reporting capabilities

• Workflow and communication applications

• Inventory and resource planning applications

• Financial and accounting applications

• Applications for the insurance and pharmaceutical industries

• Business-to-business (B2B) applications

• Business-to-customer (B2C) applications

• Company Web sites

Credit toward certification
When you pass Exam 70-547: PRO: Designing and Developing Web-Based Applications by Using the Microsoft .NET Framework, you earn credit toward the following certification:

• Microsoft Certified Professional Developer: Web Developer

Code languages
When the exam begins, you can choose the programming language in which the code segments will appear. The available code languages for this exam are:

• Microsoft Visual Basic 2005

• Microsoft Visual C# 2005

Preparation tools and resources
To help you prepare for this exam, Microsoft Learning recommends that you have hands-on experience with the product and that you use the following training resources. These training resources do not necessarily cover all of the topics listed in the “Skills measured” section.

Classroom training Microsoft E-Learning Microsoft Press books Practice tests
There is no classroom training currently available.
There is no Microsoft E-Learning training currently available.
MCPD Self-Paced Training Kit (Exam 70-547): Designing and Developing Web-Based Applications Using the Microsoft .NET Framework

Programming Microsoft Visual Basic 2005: The Language

Programming Microsoft Visual C# 2005: The Language

Programming Microsoft ASP.NET 2.0 Core Reference

Programming Microsoft ADO.NET 2.0 Core Reference

Debugging Microsoft .NET 2.0 Applications
MeasureUp
(Measureup.com)

Self Test Software
(Selftestsoftware.com)

Microsoft online resources
• Learning Plan: Get started with a step-by-step study guide that is based on recommended resources for this exam.

• Microsoft Learning Community: Join newsgroups and visit community forums to connect with peers for suggestions on training resources and advice on your certification path and studies.

• TechNet: Designed for IT professionals, this site includes how-to instructions, best practices, downloads, technical resources, newsgroups, and chats.

• MSDN: Designed for developers, the Microsoft Developer Network (MSDN) features code samples, technical articles, downloads, newsgroups, and chats.

PRO:Design and Develop Web-Basd Apps by Using MS.NET Frmwk : 70-547(CSharp) Exam

Exam Number/Code: 70-547(CSharp)
Exam Name: PRO:Design and Develop Web-Basd Apps by Using MS.NET Frmwk

“PRO:Design and Develop Web-Basd Apps by Using MS.NET Frmwk”, also known as 70-547(CSharp) exam, is a Microsoft certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 80 Q&As to your 70-547(CSharp) Exam preparation. In the 70-547(CSharp) exam resources, you will cover every field and category in MCPD helping to ready you for your successful Microsoft Certification.

QUESTION 1:
You work as the network administrator at Certkiller .com. The Certkiller .com
network consists of a single Active Directory domain named Certkiller .com. All
servers on the Certkiller .com network run Windows Server 2003 and all client
computers run Windows XP Professional. A server named Certkiller -SR26 runs
the DHCP Server service. The two file servers on the network are named
Certkiller -SR03 and Certkiller -SR04.
The Certkiller .com network is segmented into two subnets:
A. Subnet 192.168.11.0 contains the DHCP server, Certkiller -SR03, and several
client computers.
B. Subnet 192.168.12.0 contains Certkiller -SR04 and several client computers.
The current scope configuration of Certkiller -SR26 is as follows:
C. Range 192.168.11.10 – 192.168.11.200.
D. Range 192.168.12.10 – 192.168.12.200.
You replace the router running between Subnet 192.168.11.0 and Subnet
192.168.12.0 with a router that does not support BOOTP forwarding. You
immediately receive complaints from users that reside in Subnet 192.168.12.0. Users
can no longer connect to the Certkiller .com corporate network from Subnet
192.168.12.0. You access the client computer of a user that complained and discover
that the IP assigned to client computer is 169.254.3.8.
You need to ensure that all users that have client computers in the subnet can
connect to the Certkiller .com corporate network.
What should you do? Choose two correct answers. Each correct answer presents a
complete solution to resolving the issue. Choose two.
A. On Certkiller -SR04 in Subnet 192.168.12.0, enable the DHCP Relay Agent.
B. On Certkiller -SR26 in Subnet 192.168.11.0, enable the DHCP Relay Agent.
C. On Certkiller -SR03 in Subnet 192.168.11.0, enable the DHCP Relay Agent.
D. Use an alternate IP configuration to assign IP addressing configuration to
Certkiller -WS166.
E. Replace the router with a router that supports BOOTP forwarding.
Answer: A, E
Explanation: You have a router that does not support BOOTP forwarding. You
router will therefore drop DHCP broadcast messages because it is not configured to
forward them, and there is no DHCP Relay Agent. Similarly, the DHCP lease
process would not be able to occur. The initial message sent by a DHCP client is a
broadcast message. In your scenario, the new router does not support BOOTP
forwarding. In a routed network, you need a router that supports BOOTP
forwarding or you need DHCP Relay Agents if you plan to implement only one
DHCP server. To enable clients to obtain IP addresses from a DHCP server on a
remote subnet, you have to configure the DHCP Relay Agent on the subnet that

Actualtest.org – The Power of Knowing
contains the remote clients (Subnet 192.168.12.0), so that it can relay DHCP
broadcast messages to your DHCP server in Subnet 192.168.11.0.
Incorrect answers:
B, C: The DHCP Relay Agent must reside in the subnet that does not contain a DHCP
server. Subnet 192.168.11.0 contains the DHCP server.
D: You would usually configure alternate IP address configuration parameters when the
DHCP server cannot be accessed. Configuring the alternate IP address configuration is
ideal for laptop computers which connect to a number of different networks. In your case,
enabling the DHCP Relay Agent on Certkiller -SR04 in Subnet 192.168.12.0 would
resolve the issue of client computers in Subnet 192.168.11.0 not being able to access the
DHCP server.
QUESTION 2:
You work as the network administrator at Certkiller .com. The Certkiller .com
network consists of a single subnet. All servers on the Certkiller .com network run
Windows Server 2003 and all client computers run Windows XP Professional. The
Certkiller .com network contains a DHCP server named Certkiller -SR23 and a
domain controller named Certkiller -DC02.
Certkiller -SR23 leases IP addresses in the 10.11.0/24 address pool to all client
computers on the Certkiller .com network. Certkiller -SR23 has 12 client
reservations for other servers and network printers. You have configured several
detailed scope and server options. A scheduled backup of the DHCP database and
System State data on Certkiller -SR23 takes place at midnight, Monday through
Sunday.
You have received instruction to provide redundancy for the DHCP Server service.
You decide to use Certkiller -DC02 as a backup DHCP server and install DHCP
on Certkiller -DC02 without any configuration. You then stop the DHCP Server
service on Certkiller -DC02.
Should Certkiller -SR23 fail what you do to enable Certkiller -DC02 to replace
Certkiller -SR23 as the DHCP server?
A. On Certkiller -DC02, perform a non-authoritative restore of the System State data
from Certkiller -SR23. Then use the Services console to start the DHCP Server service
and authorize DHCP. Finally, reconcile the DHCP database.
B. On Certkiller -DC02, restore the tape backup of the DHCP database to a local folder.
Then use the DHCP console to restore the backup from the local folder. At a command
prompt, run the net start dhcpserver command and authorize DHCP.
C. On Certkiller -DC02, perform an authoritative restore of the System State data from
Certkiller -SR23. Manually recreate the server and scope options that were configured
on Certkiller -SR23. Then, at a command prompt, run the start dhcpserver
command and authorize DHCP.
D. On Certkiller -DC02, copy the backup to a local folder. Use the DHCP console to
restore the backup from the local folder. Then, at a command prompt, run the net
start dhcp command and authorize DHCP. Finally, recreate the 12 client reservations.

Actualtest.org – The Power of Knowing
Answer: B
Explanation: The Windows Server 2003 Backup utility includes a scheduling
feature that can be utilized to schedule a tape backup of the DHCP database for
every 24 hours. This can be performed using the Backup tab or the Schedule Jobs
tab of the Backup utility. The net start dhcpserver command would start the DHCP
Server service on Certkiller -DC02.
Incorrect Answers:
A: A system state restore is not necessary as this will only provide a backup of the
configuration details. You would need the DHCP database if you want to have
Certkiller -DC02 take over the function of Certkiller -SR23.
C: Performing an authoritative system restore and manually recreating the
Certkiller -SR23 server and scope options will not work as you need to restore the
DHCP database to a folder using the DHCP console and then restore the backup from a
backup from the same folder.
D: You do not need to recreate the 12 client reservations.
Reference:
The Microsoft MCSA/MCSE Book for Exam 70-290: Managing and Maintaining a
Microsoft Windows Server 2003 Environment, Chapter 7, lessons 1, 2 and 3.
J. C. Mackin, Ian McLean, MCSA/MCSE Self-Paced Training Kit (exam 70-291):
Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 network
Infrastructure, Microsoft Press, Redmond, 2004, Part 1, Chapter 7, pp. 375, 401
QUESTION 3:
You work as the network administrator at Certkiller .com. The Certkiller .com
network consists of a single Active Directory domain named Certkiller .com. All
servers on the Certkiller .com network run Windows Server 2003 and all client
computers run Windows 2000 Professional. The Certkiller .com network contains a
domain controller server named Certkiller -SR31 and a DNS server named
Certkiller -SR32. Certkiller -SR31 also provides DHCP services and file services.
You have received instruction to add a new server named Certkiller -SR33 to the
network as a member server in the Certkiller .com domain. You are also required to
configure Certkiller -SR33 to provide DHCP services instead of
Certkiller -SR31.
The DHCP scope configuration on Certkiller -SR31 is shown in the exhibit.
You want to prevent IP address conflicts and minimize network changes when
moving the DHCP service to Certkiller -SR33.

Actualtest.org – The Power of Knowing
What should you do?
A. On Certkiller -SR33, create a new DHCP scope with a starting address of
192.168.0.20 and an ending address of 192.168.0.254.
Then deactivate the DHCP service on Certkiller -SR31 and authorize the DHCP service
on Certkiller -SR33. Finally, activate the new DHCP scope on Certkiller -SR33.
B. On Certkiller -SR33, create a new DHCP scope with a starting address of
192.168.0.10 and an ending address of 192.168.0.254.
Then activate the new DHCP scope on Certkiller -SR33.
C. Back up the DHCP database on Certkiller -SR31 and stop the DHCP service on
Certkiller -SR31.
Then copy the backup file to Certkiller -SR33. Use the DHCP console on
Certkiller -SR33 to restore the DHCP service to Certkiller -SR33 and then authorize
DHCP services on Certkiller -SR33 and activate the DHCP scope.
D. Stop the DHCP service on Certkiller -SR31 and copy the DHCP database file on
Certkiller -SR31 to Certkiller -SR33. Then deactivate the DHCP service on
Certkiller -SR31 and authorize the DHCP service on Certkiller -SR33 and activate
the DHCP scope.
Answer: C
Explanation: The DHCP scope that is configured on Certkiller -SR31 is
192.168.0.10 – 192.168.254. To enable Certkiller -SR33 to provide DHCP services
instead of Certkiller -SR31, this DHCP scope should be configured on
Certkiller -SR33.
To prevent IP address conflicts and minimize network changes, the backup file of the
DHCP database of Certkiller -SR31 should be copied to Certkiller -SR33. The DHCP
service on Certkiller -SR31 should be stopped. This would prevent Certkiller -SR31
from assigning new address leases to clients after the backup of the database. The only
task remaining would be to restore and then authorize DHCP services on
Certkiller -SR33, and activate the DHCP scope.
Incorrect Answers:
A: This option will result in you not being able to minimize the IP address conflicts and
network changes that you will ensue when you create a new DHCP scope.
B: DHCP services have to be authorized before IP addresses and renewals of IP
addresses will be issued. This would be necessary since this option mentions a new scope
that is created on Certkiller -SR33.
D: You would first need to make a backup of the DHCP database on Certkiller -SR33
and this backup should be copied to Certkiller -SR31 if you are to minimize IP
conflicts and network changes.
Reference:
J. C. Mackin, Ian McLean, MCSA/MCSE Self-Paced Training Kit (exam 70-291):
Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 network
Infrastructure, Part 1, Chapter 7, pp. 401 – 403.

Actualtest.org – The Power of Knowing

Pass4sure 70-547(CSharp) 2. 93
Questions and Answers : 80 Q&As
Expected Date: October 23rd , 2008
Price: $129.99 $89.99

Free Down: Pass4sure Microsoft 70-547(CSharp) 2. 93
Free Down: Testking microsoft 70-547(CSharp) 2. 93
password: www.msexams.net

Download Free Latest P4S Passforsure Dumps

1. Free Pass4sure Microsoft MCPD Certification Exams Boot camp
2. Free Pass4sure Microsoft MCPD 70-536 2.95
3. Free Pass4sure Microsoft TS 70-545(CSharp) 2.95
4. Free Pass4sure Microsoft MCPD 70-549(C++) 2.95
5. Free Pass4sure Microsoft MCPD 70-548(C++) 2.95
6. Free Pass4sure Microsoft MCPD 70-549(VB) 2.95
7. Free Pass4sure Microsoft MCPD 70-548(VB) 2. 83
8. Free Pass4sure Microsoft MCPD 70-549(CSharp) 2.83
9. Free Pass4sure Microsoft MCPD 70-547(VB) 2. 93
10. Free Pass4sure Microsoft MCPD 70-548(CSharp) 2. 83

Posted in: MCPD by PassGuide-Best Microsoft Certification Bootcamp Tags: MCPD